- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
Hexagonal padded panel: size and material
Each unit is a single panel. The hexagon measures 25 cm from side to side and 28.8 cm from point to point, with sides of 14.4 cm (the title rounds the size to 25 × 28 cm). One panel covers about 0.054 m², so for one square metre you need about 19. The material given by the supplier is PVC. We have no further details on the covering or the filling, and the thickness is not stated, so we do not include it. The back is brown, with white adhesive strips already fitted. Each panel is a single colour.
How to fit the hexagonal padded panel: soft filling and adhesive strips
The panel is padded: if you press it with your hand, the surface gives, as you can see in the photo. The adhesive strips on the back are already fitted. To fit it, clean and dry the wall, remove the protective covering from the strips and press the panel firmly, especially along the edges. Before you start, lay out the arrangement on paper or on the floor, then draw a horizontal line with a spirit level: the hexagons join side by side, and a small error in the first row shows up in the rows above. Remember that an adhesive can take some paint with it when you remove it.
Seven colours of padded panel for the headboard
There are seven colours: bright yellow, light blue, light grey, cherry pink, ivory white, dark grey and beige. Each colour is a separate variant, so you can combine them as you like and order the quantity you need of each. In one of the photos the headboard alternates dark grey, light grey and ivory white, with a few loose hexagons rising upwards that lighten the edge of the arrangement. Other simple combinations: cherry pink, light grey and ivory white for a light bedroom; light blue and ivory white for a children's room; beige and ivory white for a soft effect.
Where to use the hexagonal panel: headboard, children's room and bed side
The photos show the panels as a headboard and as a wall covering along the bed, also in a children's room: the padded surface is softer than the wall when you lean against it. For a headboard 140 cm wide and 60 cm high, that is 0.84 m², you need about 16 panels, plus some for the edges. For a strip along a single bed measuring 190 × 50 cm you need about 18. You can leave the top area free and let a few loose hexagons rise, as in the photo. The supplier does not state any acoustic or impact-protection properties: treat it as a decorative element.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many panels do I need for a headboard?
One panel covers about 0.054 m², so you need about 19 per square metre. A 160 × 60 cm headboard, that is 0.96 m², needs about 18 panels, plus two or three to complete the edges. Note that each item is one panel: enter the quantity of each colour you choose.
How thick is the panel?
The supplier does not state the thickness and the photos include no measurement, so we cannot give you a figure. We know it is padded and that the surface gives when you press it with your hand. If the thickness matters to your project, for example behind a bedside table or near a switch, write to us before you order.
Will it stick to any wall?
The adhesive strips hold well on smooth, clean and dry walls. On rough plaster, wallpaper or fresh paint the grip is weaker: in those cases it is wiser to stick the panels to a thin board and fix that board to the wall. Wait until new paint is fully dry before fitting them.
How do I clean it?
For dust, a soft, dry cloth is enough. For a small mark, wipe with a barely damp cloth and dry it straight away. The supplier says the material is PVC, but we have no data on resistance to water or stains: avoid harsh detergents and do not soak the panel.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Peel and stick wall panel, brown wood effect slats, 40 cm × 3 m
Regular price $38.00 AUDRegular priceSale price $38.00 AUDNew -
3D wall panel, square, PVC, self-adhesive
Regular price From $49.00 AUDRegular priceSale price From $49.00 AUDNew -
Padded wall panel, peel and stick, leather effect, set of 5 panels
Regular price From $73.00 AUDRegular priceSale price From $73.00 AUDNew -
Stick-on headboard, Nordic style, padded wall panel
Regular price From $36.00 AUDRegular priceSale price From $36.00 AUDNew -
Peel and stick wall panel, 3D linen effect foam roll, plain colour
Regular price From $15.00 AUDRegular priceSale price From $15.00 AUD+8 moreNew -
3D wall panel, PVC, self-adhesive, assorted designs, 30 × 30 cm
Regular price From $72.00 AUDRegular priceSale price From $72.00 AUDNew -
3D wall panel, PVC, self-adhesive, cut to size
Regular price From $59.00 AUDRegular priceSale price From $59.00 AUDNew -
3D wall panel, peel and stick XPE foam, linen effect, 50 cm × 2.8 m
Regular price From $23.00 AUDRegular priceSale price From $23.00 AUD+1 moreNew








