- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
3D wall panel: size and material
Each item is one roll, 50 cm wide and 2.8 m long, or about 1.4 m². The thickness given by the supplier is 1.8 mm. The material is XPE foam: the supplier's technical sheet also mentions paper, but the description text and the product name point to XPE foam. Measurements have a tolerance of 1-3 cm, as they are taken by hand. For a wall up to 2.8 m high and 3 m wide you need 6 rolls. The pack contains one roll, which you cut to size with scissors.
How to fit the 3D wall panel
The back is self-adhesive and protected by a film that peels off, as the photo shows. Before you start, remove dust and loose particles from the surface, as the supplier advises, and dry it well. Measure the wall and cut the strip with scissors, leaving a small margin. Peel off the film slowly and press the panel onto the wall from top to bottom, lining it up with a pencil level line. An honest tip: the adhesive can pull some paint off when you remove it, and on rough or dusty walls the grip is weaker. Test a corner that is not very visible.
3D wall panels in six linen-effect shades
There are six shades: light blue, light grey, light beige, medium grey, white and light pink. In all shades the photos show a raised texture that resembles linen fabric, finer on the white: it is an effect, and the material is still foam. The group photo shows five rolls in different shades and one roll partly covering an unfinished wall. The names describe what you see in each variant's photo: the blue is soft, the beige is light with a cream tint, the medium grey is darker than the light grey and the pink is pale. Colours on screen may look different from the real colour. If you order several rolls, order them together: the supplier advises buying enough at once so they come from the same batch.
Where to use 3D wall panels
The supplier suggests them for the kitchen wall, the bedroom and the TV wall in the living room. The photo shows a living room with a white wall with a raised texture. They work to cover a smooth wall with a decorative layer of foam that is already self-adhesive on the back. In the kitchen, choose an area away from hobs and cookers: we have no verifiable data on heat. We present them as a decorative wall covering: we have no verifiable data on acoustics or insulation.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many rolls do I need for one wall?
Each roll is 50 cm wide and 2.8 m long. Divide the wall width by 0.5 m: for a wall 3 m wide you need 6 rolls, about 8.4 m², if the height is up to 2.8 m. For taller walls you need extra strips. Add one roll if you expect many cuts, and order everything together so the rolls come from the same batch.
Can I fit it over tiles?
The supplier also says it can be used on tiles. The adhesive holds best on smooth, clean and dry surfaces: with raised grout lines the grip is weaker and, at 1.8 mm thick, the grout pattern may show through. Clean and degrease the surface well and test a corner first.
Will it come off without damaging the wall?
The supplier does not describe the adhesive as removable, so we cannot guarantee that it will come off without leaving marks. When you remove it, it may take some paint or leave residue, especially on walls painted recently. If you are not sure, stick a small piece in a corner that is not very visible, wait a few days and try to remove it.
Is the colour the same as in the photos?
The supplier warns that rolls from different batches may have slightly different shades, so it is wise to order all the rolls together. As with any photo, the colour on screen may look a little different from the real one. The shade names describe the variant photos: if colour matters to you, take this into account.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Peel and stick wall panel, brown wood effect slats, 40 cm × 3 m
Regular price $38.00 AUDRegular priceSale price $38.00 AUDNew -
3D wall panel, square, PVC, self-adhesive
Regular price From $49.00 AUDRegular priceSale price From $49.00 AUDNew -
Padded wall panel, peel and stick, leather effect, set of 5 panels
Regular price From $73.00 AUDRegular priceSale price From $73.00 AUDNew -
Padded wall panel, hexagonal peel and stick, 25 × 28 cm
Regular price From $42.00 AUDRegular priceSale price From $42.00 AUD+1 moreNew -
Stick-on headboard, Nordic style, padded wall panel
Regular price From $36.00 AUDRegular priceSale price From $36.00 AUDNew -
Peel and stick wall panel, 3D linen effect foam roll, plain colour
Regular price From $15.00 AUDRegular priceSale price From $15.00 AUD+8 moreNew -
3D wall panel, PVC, self-adhesive, assorted designs, 30 × 30 cm
Regular price From $72.00 AUDRegular priceSale price From $72.00 AUDNew -
3D wall panel, PVC, self-adhesive, cut to size
Regular price From $59.00 AUDRegular priceSale price From $59.00 AUDNew








