Kitchen vinyl wrap

Kitchen vinyl wrap comes in a roll: you smooth it onto doors, worktops and splashback and renew the units without replacing them. You can choose marble, wood, granite and aluminium effect, or else lacquer effect, pearl effect and soft touch.

For the rest of the home, see the furniture vinyl wrap; for a plain colour, the plain coloured vinyl wraps.

6 products

Vinyl wrap for the kitchen: the adhesive finishes you can choose

Every kitchen vinyl wrap here comes in a roll, with the adhesive already spread on the back and protected by a paper that you peel off as you put it on. Most are vinyl; the matt marble effect is thick PVC. The finishes available:

  • marble effect, the widest choice: glossy white and black, glossy pink, matt or in several patterns, with rolls 40, 55 or 60 cm wide;
  • brown wood effect for worktops and doors, or wood plank effect for the kitchen and walls;
  • granite effect and white terrazzo effect, designed for worktops;
  • silver-coloured aluminium effect, for worktops, drawers and splashback;
  • pearl effect, glossy lacquer effect and soft touch, for doors and furniture.

Vinyl wrap for kitchen cupboard doors: which to choose

On doors, the finish counts above all. The glossy lacquer effect reflects the light and brightens a small kitchen, but it shows fingerprints and marks. Soft touch is soft to the feel and is also used on wardrobe doors. If you want wood on the doors and furniture in other rooms too, see the wood effect vinyl wrap for the whole house.

Then the sizes: measure the width and height of each door and choose a roll that covers it in a single piece, with 2 or 3 cm extra on each side to fold over the edges. Some designs are 40, 55 or 60 cm wide; for the others, the width is given on the product page. For the glass doors of display cabinets you need a different product, window film.

Vinyl wrap for kitchen worktops

For the worktop you can choose between marble effect, granite and terrazzo effect, wood effect and aluminium effect, which has a design made specifically for worktops and drawers. An adhesive vinyl for a kitchen worktop renews a marked laminate or a colour you no longer like, but it copies the surface underneath: bumps, cracks and lifted edges have to be fixed before you put it on.

A worktop is usually 60 cm deep or a little more, and the front edge adds a few centimetres: even with the 60 cm wide roll a second strip may be needed. Put it next to the wall, where the join shows less, or use it only for the edge. After putting it on, always use a chopping board and dry any water next to the sink.

Vinyl wrap for the kitchen wall and splashback

On the wall between the worktop and the wall units you can use the aluminium effect vinyl designed for the splashback or the wood plank effect, listed for kitchens and walls: put them behind the sink or, in any case, away from the hob. The vinyl holds if the paint is smooth, dry and well bonded; on raw plaster or crumbling paint it comes away. The 55 cm wide marble effect design also suits the bathroom.

If you prefer a covering in modules, there are kitchen tile stickers; for more rigid sheets, PVC panels for bathrooms and kitchens. To cover a whole wall there is also peel and stick wallpaper.

How to apply kitchen cabinet vinyl wrap to doors and worktops

You need a tape measure, a craft knife with a new blade, a soft squeegee and a degreaser. The technique is the same as for the door vinyl wrap for interior doors, with extra care over grease. The steps:

  • remove handles and knobs, degrease doors and worktops and let them dry;
  • cut the piece 2 or 3 cm larger on each side;
  • peel back only a few centimetres of the backing paper, line up the top edge and carry on section by section;
  • run the squeegee from the centre towards the edges to push out the air; if a bubble is left, prick it with a pin and flatten it;
  • at the corners cut at 45 degrees, fold the flaps round the back, trim the excess and refit the handles, piercing through the vinyl.

Is there a kitchen vinyl wrap that withstands heat?

Not in this collection: these films are not made to be in contact with heat. Do not put them on the hob, the oven or right up against the burners, and do not put hot pans or trays on the covered worktop. If you are looking for an adhesive vinyl that withstands heat to put behind the hob, you will not find it here: direct heat softens the vinyl and makes the adhesive give way.

To clean it, a soft cloth with warm water and a little mild soap is enough. Six designs are described as anti-grease, but it is still advisable to dry oil splashes straight away. Avoid alcohol, solvents, bleach and abrasive sponges: they dull glossy finishes and can make the edges lift.

What it costs to cover a kitchen with vinyl

The price of the rolls depends on the finish, the width and the material. Compared with replacing doors or worktop, you pay only for the material, because you put it on yourself. To compare designs, work it out per square metre: divide the price of the roll by the area it covers (width × length).

To know how many rolls you need, measure each door and each worktop, add the centimetres for the flaps and compare the total with the width and length of the roll given on the product page. If the marble effect pattern has to continue from one piece to the next, leave extra margin to line up the veining. Delivery is free above a minimum order value and comes with tracking; the maximum delivery time for your country is shown on each product page before you buy, and you can return your order within 30 days.

Frequently asked questions

What is the difference between adhesive paper and PVC film?

In everyday language they are often used as synonyms: many people call adhesive paper what is really a vinyl film, that is, a PVC film. True adhesive paper has a paper base, absorbs water and soon gets spoiled in the kitchen. Vinyl or PVC film is cleaned with a damp cloth and follows edges and corners better. The products in this collection are films, not paper.

How do you renew a kitchen worktop without replacing it?

If the worktop is in good condition, you can cover it with a marble, granite, wood or aluminium effect vinyl. Clean and degrease well, smooth the vinyl on with the squeegee starting from the wall and fold it over the front edge. If the worktop is swollen by water or has lifted parts, the vinyl alone is not enough: it has to be repaired first. On the covered worktop always use a chopping board and trivet.

How many rolls do you need to cover the kitchen doors?

It depends on the number of doors and the length of the roll, given on the product page of each design. Measure the width and height of each door, add 2 or 3 cm per side for the flaps and add up the heights. Example: with a roll 60 cm wide, a door of 50 × 70 cm needs about 75 cm of roll. Divide the total by the length of the roll and round up.

Can the vinyl go on lacquered or laminate doors?

Yes: smooth surfaces are exactly where the adhesive grips most firmly. Wash the doors with a degreaser, rinse and let them dry well, because even a film of grease reduces the grip. On raw wood, flaking paint or doors with raised grain the vinyl grips less and shows the irregularities: in those cases sand and fill before putting it on.

Can adhesive vinyl be removed from kitchen units?

It can be removed, but the adhesive is made to stay put. Peel slowly, pulling the flap almost parallel to the furniture; a hair dryer on a low setting softens the glue. On laminate and lacquered surfaces usually only adhesive residue is left, which comes off with warm water and soap. On varnished or already damaged wood some of the finish may come off too: test first in a hidden corner.