- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
3D brick effect wall panels: size and material
Each panel is a 30 × 30 cm square, 0.35 cm thick, made of light, flexible PVC. The surface has rows of small offset bricks, each about 12.5 × 4.5 cm, separated by lower joints. One panel covers about 0.09 m²: the pack of 5 covers about 0.45 m² and the pack of 10 about 0.9 m². The supplier advises adding 10% for cuts and ordering all the panels together, because the colour may vary slightly between batches.
How to fit the brick effect wall panels
In the photo the panel rests against the wall next to those already fitted: the bricks on the edges line up with the neighbouring row, so the cladding looks continuous. Before you start, clean and dry the wall well; if it was painted recently, the supplier advises waiting up to three weeks. Plan the layout and cut the panels for the last row with a craft knife or scissors. Then peel off the film from the back, place the panel and press it with a plastic spatula, working along the joints and the deepest spots. They are for smooth surfaces such as smooth paint, ceramic tiles, glass, metal and wood; not for unpainted plasterboard, rough render, brick or stone walls, or greasy walls.
Five brick colours, from red to white
The brown has small taupe-coloured bricks with brownish shades and dark joints, as in the photo. The red reproduces fired clay brick, with orange tones and brown joints. The grey has dark grey bricks with light joints, and the light grey alternates grey and beige tones. In white, everything is the same colour, so the relief is what you notice: in side light small shadows appear between one brick and the next. Red and brown give a rustic feel to an entrance or a country-style kitchen; white and light grey are more understated and suit a modern living room.
Where to use the brick effect panels at home
In the photos of the range, the red panels cover the wall behind a hall console and the white ones cover the wall behind a living room sofa. The light grey in this picture works well with light wood. Other ideas: the wall behind the bed, the side of a kitchen island, a corner of the study. The supplier also sets some limits: the panels are for indoor use, not for floors or showers, where they would be in direct contact with water, and they should be kept at least 30 cm from the centre of hobs and fireplaces.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many panels do I need?
Multiply the width by the height of the area you want to cover to get the square metres, divide by 0.09, the area of one panel, and add 10% for cuts. For example, for 2 m², you need 23 panels, which with the margin becomes 25: two packs of 10 and one pack of 5, all in the same colour.
Can they be removed without damaging the wall?
The supplier advises warming the adhesive with a hairdryer or heat gun and pulling slowly, starting from the corners. Bear in mind, though, that a strong adhesive may take some paint with it, especially from a recently painted wall. If you think you may remove them later, first apply them to a thin wooden board.
Can they be used in the bathroom or kitchen?
Yes, on smooth, clean walls and away from the direct flow of water. The supplier advises against the shower, where the panels would be in direct contact with water, and asks you to keep them at least 30 cm from the centre of the hobs. In the kitchen, degrease the wall well before fitting: the adhesive does not grip on greasy surfaces.
Can they be cut?
Yes, PVC can be cut with a craft knife or with strong scissors. For a straight cut use a metal ruler and, where you can, follow a joint: the edge shows less. This will help with the last row, the corners and around sockets and switches. Always cut before you peel off the film on the back.
Is the colour the same as in the photos?
The screen may make the shade look slightly different from real life. Between production batches there may be small differences in colour, which is why the supplier advises ordering all the panels you need at once, including 10% extra for cuts.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Brick effect wall panel, 3D, stone and wood effect, 30 × 30 cm
Regular price From $39.00 AUDRegular priceSale price From $39.00 AUDNew -
Stone effect wall panel, 3D PU, 25 × 45 cm, 2 cm thick
Regular price From $59.00 AUDRegular priceSale price From $59.00 AUDNew -
Self-adhesive wallpaper, 3D brick effect foam, 70 cm × 10 m
Regular price From $105.00 AUDRegular priceSale price From $105.00 AUDNew -
Self-adhesive wallpaper, travertine effect, 40 × 300 cm
Regular price $108.00 AUDRegular priceSale price $108.00 AUDNew -
Stone effect wall panel, self-adhesive, matt finish, 30 × 30 cm
Regular price From $19.00 AUDRegular priceSale price From $19.00 AUDNew -
Stone effect wall panel, 3D vintage style, 10 pieces
Regular price From $111.00 AUDRegular priceSale price From $111.00 AUDNew -
Brick effect wall panel, 3D foam, 10 pieces of 38 × 35 cm
Regular price From $27.00 AUDRegular priceSale price From $27.00 AUDNew -
Brick effect wall panel, black 3D PET, 70 × 100 cm
Regular price $26.00 AUDRegular priceSale price $26.00 AUDNew








