- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
Tile stickers: sizes and material
Each sheet measures 15.2 × 15.2 cm, is 1.2 mm thick and weighs about 27 g. The design divides the sheet into four small tiles separated by fine grout lines. The material is PET and PU in several layers: a protective film on the surface, a 3D vinyl gel layer, the printed colour layer, the adhesive and a protective paper on the back. One sheet covers about 0.023 m²: the pack of 6 sheets covers about 0.14 m²; the pack of 12, about 0.28 m²; and the pack of 24, about 0.55 m². For a long splashback you can add several packs of the same model.
How to fit tile stickers on a splashback
The surface must be smooth, clean and dry: degrease the splashback thoroughly, because in a kitchen grease reduces the grip of the adhesive. Draw a horizontal line with a spirit level along the worktop and start from a corner. Peel off the paper from the back, place the first sheet on the line and press with your fingers or a soft spatula, from the centre towards the edges. Place the following sheets so that the grout lines match. Near wall units, sockets and corners, cut the sheet with scissors or a craft knife. An honest tip: on a painted wall, the sheets can take some paint with them when peeled off.
Six colours with a glazed tile effect
The six models are told apart by colour. In the photos on a white background you see dark green, the one used in the lifestyle photos, anthracite, which is almost black, terracotta, pink, white with grey grout lines and blue. All share the same design: four small tiles per sheet, with a glossy, slightly uneven surface reminiscent of a handmade glazed tile. In the light, each square reflects slightly differently. The model name does not state the colour: if you are looking for a specific shade, contact us before ordering and we will confirm which model matches. Colours may look different on screen.
Where to use tile stickers: kitchen, bathroom and furniture
In the photos, the sheets cover a kitchen splashback, the wall behind a basin up to half height, and the wall behind a wall-hung toilet. The supplier also suggests them for walls, wall cabinets and furniture, always on smooth, clean surfaces. You can use them to refresh a strip of old tiles, a recess or the front of a unit. There are two limits: no shower or permanently wet areas, because adhesion against water is not proven, and nothing directly behind the hob, where heat can warp or lift an adhesive covering. On rough or crumbling walls, the adhesive holds poorly.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many sheets do I need for a splashback?
Count how many sheets fit across and up. For a splashback of 150 × 60 cm, you need 10 across and 4 up, that is 40 sheets: two packs of 24 leave a few spare sheets for cuts. Order all the sheets of the same model together, to reduce the risk of tone differences.
Can they be applied over old tiles?
Yes, if the tiles are smooth, clean and well degreased. Deep grout lines are the weak point: there the sheet does not sit flat and the adhesive holds less. If the grout lines are very deep, fill them with filler first and let it dry. Test in a hidden corner before covering the whole wall.
Can they go behind the hob?
Not in the strip directly behind the hob: it has not been shown how these sheets cope with heat, so we cannot promise it. In that area it is better to leave the wall as it is or protect it with a glass or steel panel; you can use the adhesive sheets on the rest of the splashback, away from the flame.
Can they be used in the bathroom?
On bathroom walls away from water, yes, as in the photos behind the basin and the toilet. We advise against the inside of the shower and the edge of the bath: adhesion against water and steam is not proven. After showering, ventilate the bathroom and dry any splashes on the sheets, especially along the edges.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Tile stickers, 3D adhesive PVC sheets, 30 × 30 cm, 7 colours
Regular price From Dhs. 36.61 AEDRegular priceSale price From Dhs. 36.61 AED+2 moreNew -
Tile stickers, matt decorated design, set of 10, 13 models
Regular price From Dhs. 36.61 AEDRegular priceSale price From Dhs. 36.61 AEDNew -
Peel and stick flooring, cement and stone effect, 40 cm wide
Regular price From Dhs. 53.06 AEDRegular priceSale price From Dhs. 53.06 AEDNew -
Marble effect vinyl wrap, 30 × 30 cm for walls and tiles
Regular price From Dhs. 81.85 AEDRegular priceSale price From Dhs. 81.85 AED+4 moreNew -
Tile stickers, abstract arch motif, 20 × 20 cm, 10 pieces
Regular price Dhs. 114.75 AEDRegular priceSale price Dhs. 114.75 AEDNew -
Tile stickers, 3D XPE foam, 30 × 30 cm, 8 designs
Regular price From Dhs. 102.41 AEDRegular priceSale price From Dhs. 102.41 AEDNew -
Peel and stick flooring, wood and cement effect, 40 cm × 3 m
Regular price From Dhs. 106.53 AEDRegular priceSale price From Dhs. 106.53 AEDNew -
Tile stickers, macaron gradient, set of 10, 8 models
Regular price From Dhs. 48.94 AEDRegular priceSale price From Dhs. 48.94 AEDNew








