- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
Stone effect self-adhesive wallpaper: size and material
Each roll measures 45 cm wide and 1 m, 3 m or 10 m long, depending on the size you choose. The 1 m roll covers about 0.45 m², the 3 m roll about 1.35 m² and the 10 m roll about 4.5 m². The material is PVC, that is vinyl. The supplier describes it as slightly thicker than ordinary wallpaper, but does not give the thickness in figures. The back has a printed grid with numbers, which helps you measure and cut with scissors. Work out the area carefully before you order: the supplier warns that colours and pattern can vary from one production batch to another.
How to apply self-adhesive wallpaper
As the photo shows, the back has a film that you peel off: underneath is the adhesive. Before you start, clean and dry the surface with a cloth, because the grip depends on a smooth base, free of dust and grease. Measure the area you want to cover, cut the paper with scissors following the grid, and peel off the film starting from one corner, a section at a time. Press with a cloth to push out the air; if bubbles remain, you can prick them with a needle. An honest tip: a strong adhesive can take some paint with it when removed, and it grips less on rough surfaces.
Stone effect wallpaper in three lengths
There is one design, a stone effect with blocks of different shapes and tones, as in the living room photo. Only the length of the roll changes. The 1 m roll is enough for a small area, for example a piece of furniture or a shelf. The 3 m roll covers a strip of wall, while the 10 m roll is enough for a whole wall: at a height of 2.5 m you get 4 strips of 45 cm, that is a width of about 1.8 m. If you need to cover a larger area, order everything together: it is the simplest way to reduce batch differences, although we cannot guarantee they will disappear.
Where to use stone effect wallpaper
The supplier lists it for living room, dining room, kitchen and bathroom, and cites as surfaces walls, furniture, tiles, fridge, cooker hood, windows and switch plates. The photos show it on a wall behind a sofa and in a dining room. For an accent wall behind a sofa or bed, or to refresh a piece of furniture, it is a practical option. The supplier gives no data on heat and water, so keep it away from hobs, flames and direct splashes. Allow a few extra centimetres for cuts.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many metres do I need for one wall?
The roll is 45 cm wide, so you need to cover the width with strips placed side by side. For a wall 2 m wide and 2.5 m high you need 5 strips of 2.5 m, that is 12.5 m of paper: for example, a 10 m roll and a 3 m roll. Add a few centimetres to each strip to trim at the top and bottom.
Do rolls from different batches have the same colour?
This is not guaranteed. The supplier warns that colour and pattern can differ between production batches and because of the angle of cut. If you need several rolls for one wall, order them at the same time and compare the tone before sticking, so you avoid differences between one strip and the next.
Can it be removed without damaging the wall?
The supplier only mentions the self-adhesive back, so we cannot promise it will come off without leaving marks. On a painted wall, especially one painted recently, some paint may come away and a little adhesive residue may stay. If you want to be careful, test first with a small piece in a corner.
Which surfaces can it be applied to?
The supplier cites walls, furniture, tiles, fridges, cooker hoods, windows and switch plates. On all of them the surface must be smooth, clean and dry. On rough or raised surfaces the adhesive grips less, and the relief can show through the paper, so it is advisable to test first in a hidden spot.
Can I use it in the kitchen or bathroom?
The supplier lists the kitchen and bathroom among the uses, but gives no data on heat, steam or water. For that reason we advise against fitting it near hobs or flames, and against direct splashes. Only consider it well away from heat sources.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Brick effect wall panel, rustic 3D PVC, 30 × 30 cm
Regular price From £20.43 GBPRegular priceSale price From £20.43 GBPNew -
Brick effect wall panel, 3D, stone and wood effect, 30 × 30 cm
Regular price From £19.57 GBPRegular priceSale price From £19.57 GBPNew -
Stone effect wall panel, 3D PU, 25 × 45 cm, 2 cm thick
Regular price From £29.83 GBPRegular priceSale price From £29.83 GBPNew -
Self-adhesive wallpaper, 3D brick effect foam, 70 cm × 10 m
Regular price From £52.90 GBPRegular priceSale price From £52.90 GBPNew -
Self-adhesive wallpaper, travertine effect, 40 × 300 cm
Regular price £54.61 GBPRegular priceSale price £54.61 GBPNew -
Stone effect wall panel, self-adhesive, matt finish, 30 × 30 cm
Regular price From £9.32 GBPRegular priceSale price From £9.32 GBPNew -
Stone effect wall panel, 3D vintage style, 10 pieces
Regular price From £56.32 GBPRegular priceSale price From £56.32 GBPNew -
Brick effect wall panel, 3D foam, 10 pieces of 38 × 35 cm
Regular price From £13.59 GBPRegular priceSale price From £13.59 GBPNew








