- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
Tile stickers 3D artistic: size and material
Each set contains 24 PVC stickers, in one of three sizes: 10 × 10, 15 × 15 or 20 × 20 cm. Placed without gaps, the 24 pieces cover about 0.24 m² in the small size, 0.54 m² in the medium and 0.96 m² in the large. The supplier gives a thickness of 0.26 mm: these are thin sheets, so the 3D effect in the name should be understood as a design effect, not as relief. The supplier warns that measurements may vary by 1 to 3 cm because they are taken by hand: if you work to a precise space, check one piece with a ruler.
How to fit tile stickers
They are self-adhesive: peel the film off the back and stick the piece. The supplier gives three steps: remove the dust from the surface, peel off the film and stick, then finish by pressing firmly. The surface must be smooth and free of dust, holes and grease. The supplier advises against rough or damaged surfaces and brick. For a tidy result, draw a reference line in pencil and test the layout before removing the film. The pieces can be cut and trimmed, for example with a cutter and a ruler, to fit corners. The supplier says they can be removed, but test first on delicate paint.
Thirteen models: choose the colours and designs
The model sets the colour range. The 24 stickers in a set have designs that differ from one another, as in the photos.
- Model 1: yellow, blue, pink, orange and light blue
- Model 2: white and black, ornamental designs
- Model 3: coloured flowers on a white background
- Model 4: petrol blue and white, mandalas
- Model 5: black, white and gold, varied designs
- Model 6: grey with pink and light blue geometric shapes
- Model 7: red and cream, snowflakes and deer
- Model 8: flowers on cream, blue, orange and black backgrounds
- Model 9: grey, white and beige, mandalas
- Model 10: brown, black and gold
- Model 11: blue and gold, mandalas
- Model 12: light blue, white and beige
- Model 13: blue, orange and white
Where to use tile stickers
The photos show them on kitchen splashbacks, behind a washbasin, on the risers of a staircase, on a chest of drawers and on wooden doors. The supplier lists smooth, dust-free surfaces as suitable: tiles, glass, metal and stairs. It also suggests them for bathroom tiles, but does not state how much water or steam they tolerate, so avoid direct and constant contact with water. They are not for rough, damaged or brick surfaces. The supplier suggests mixing the designs: you can cover a whole wall or just a strip above the sink or on the stair risers.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many sets do I need for a splashback?
Multiply the width by the height. For 1.8 m², for example 3 m × 0.6 m, you need at least 2 sets of 20 × 20 cm, 4 of 15 × 15 cm or 8 of 10 × 10 cm. Allow a few extra pieces for cuts around corners and sockets. Each set is one model only: for a mosaic with several models, order more sets.
Does a set contain different designs?
Yes. The 24 stickers in a set have designs that differ from one another, within the same colour range of the chosen model, as in the photos. You cannot choose individual designs. If you need more pieces of the same design, or designs from two models, order more sets and use the pieces you prefer.
Can they be removed after fitting?
The supplier says they can be removed. We cannot guarantee that they will leave no marks: this depends on the surface, the time and how you peel them. On recent or delicate paint some colour may come off. To remove them, pull slowly from one corner and test first on a piece that will not be seen.
Can they be used in the bathroom or kitchen?
The supplier suggests them for bathroom tiles and for the kitchen, on smooth, dry surfaces. It gives no figures for water, steam or heat resistance, and we do not state any. Avoid direct and constant contact with water and areas near flames or hobs.
Are the colours and sizes exact?
Colour on screen may differ from the real product, depending on your monitor. The supplier also notes a size difference of 1 to 3 cm because measurements are taken by hand. For precise work, check the sizes of the first set with a ruler before covering the whole surface.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Tile stickers, beige glossy effect for kitchen and bathroom
Regular price From £40.94 GBPRegular priceSale price From £40.94 GBPNew -
Peel and stick flooring for bathrooms, marble effect, 40 cm wide
Regular price From £26.41 GBPRegular priceSale price From £26.41 GBPNew -
Marble effect vinyl wrap, 30 × 30 cm for walls and tiles
Regular price From £17.01 GBPRegular priceSale price From £17.01 GBP+4 moreNew -
Tile stickers, matt 3D PVC sheets, 30 × 30 cm, 4 colours
Regular price From £8.46 GBPRegular priceSale price From £8.46 GBPNew




