- Tracked delivery in 7-15 business days
- Legal guarantee under the law of your country
- Returns within 30 days
- Secure payment, in a single instalment
- Free shipping from €39
Marble effect vinyl wrap 60 cm: sizes and material
The roll is 60 cm wide and you choose 1, 5 or 10 metres long. With these lengths you cover about 0.6 m² (1 m), 3 m² (5 m) or 6 m² (10 m), not counting trimmings or overlaps. The material is PVC: a vinyl with a print that imitates marble and, on the back, the adhesive layer covered by paper. The supplier does not state the thickness, so we do not write it.
To work out how much you need, measure the surface and add a few centimetres per side: the final trim is made after fitting. If the surface is wider than 60 cm, plan two strips side by side and align the veins carefully.
How to apply the self-adhesive vinyl
Fitting follows the supplier's steps: measure and cut the vinyl, remove the paper and stick, smooth with your hand, align the strips and trim the excess. The surface must be smooth, clean and dry. The supplier advises against rough or uneven surfaces, such as relief plaster or exposed stone.
Remove the paper only a few centimetres at a time and press from the centre towards the edges, so the air escapes and fewer bubbles form. If you fit several strips, first draw a reference line with a spirit level. An honest tip: the adhesive is made to stay and, when removed, it may take some paint or varnish with it, especially if the surface was treated recently.
Marble effect vinyl in a single model
This roll comes in one model only, 01: a glossy white in the photos, with marble veins that are only faintly hinted at. The effect is purely visual: the vinyl is still a PVC sheet and does not have the weight or hardness of stone. Colours and veins may look a little different on screen than in reality.
If you need several rolls for the same surface, order them together: the supplier advises buying everything you need at once, so the rolls come from the same batch and there is no difference in tone between one piece and another.
Where to use marble effect vinyl
The supplier indicates it for walls, furniture and drawers, worktops, shelves, ledges, wardrobe shelves, windows and larders. In the kitchen you use it to cover a worktop, the doors of wall units or the side of a unit; in other rooms, for a bedside table, a desk or a ledge.
On a worktop, bear in mind that the supplier does not state any heat resistance: do not place hot pans on it and keep the vinyl away from the hobs. To clean it, use a soft cloth and a mild detergent, without abrasive scourers.
Need help?
Message us on WhatsApp or by email with any question about the product or your order.
Frequently asked questions
How many metres of vinyl do I need?
It depends on the surface. A roll 60 cm wide and 1 m long covers about 0.6 m²; the 5 m roll about 3 m²; the 10 m roll about 6 m². Measure height and width, work out the square metres and add a few centimetres per side for the final trim and the overlaps.
Can it be used on the kitchen worktop?
The supplier also lists worktops, but does not state any heat resistance. That is why we advise against placing hot pans or trays directly on it and keeping it away from the hobs. To clean it, use a soft cloth and a mild detergent, without abrasive scourers.
Does it peel off without damaging the surface?
We cannot guarantee it. The adhesive is designed to stay and, when removed, may take some paint or varnish with it, especially on recently treated surfaces. If you want to see the result, test a small, inconspicuous corner before covering everything.
Can I fit it on a wall with relief plaster?
The supplier lists it for smooth, clean and dry surfaces and advises against rough or uneven ones, such as relief plaster or exposed stone. On such a wall the adhesive touches fewer points and holds less well. If the wall is painted and smooth, clean it and dry it well before fitting.
How do I cut the vinyl?
With scissors or a well-sharpened craft knife. Measure the piece, draw its outline on the paper on the back and cut before removing the paper; then fit the vinyl and trim the excess when you have finished. For straight cuts near the corners, use a metal ruler.
When will my order arrive?
Delivery takes 7 to 15 business days after payment; you receive the tracking number by email. The maximum delivery time is 15 business days: if it is not met, you can cancel the order and get a full refund.
Can I return the product?
Yes: you have 30 days from delivery to return the unused product in its original packaging. Return shipping costs are paid by the customer. All the details are in the return policy.
How can I pay?
You pay the full amount when you order, with the payment methods offered at checkout. We do not offer instalments or cash on delivery.
Customer reviews
This product has no reviews yet. We only publish reviews from people who bought it in our shop.
You may also like
-
Aluminium effect vinyl wrap, silver or gold, 40 cm wide
Regular price From £7.57 GBPRegular priceSale price From £7.57 GBP+5 moreNew -
Marble effect vinyl wrap, glossy black or white, 40 cm roll
Regular price From £10.12 GBPRegular priceSale price From £10.12 GBPNew -
Furniture vinyl wrap, terrazzo effect, 40 cm, for kitchen worktops
Regular price From £10.12 GBPRegular priceSale price From £10.12 GBPNew -
Wood effect vinyl wrap, 40 cm roll, PVC, six models
Regular price From £10.12 GBPRegular priceSale price From £10.12 GBPNew -
Furniture vinyl wrap, kitchen lacquer effect, 10 colours
Regular price From £29.68 GBPRegular priceSale price From £29.68 GBP+5 moreNew





